Products Narviflex Group

We have many manufacturing options for you in our factories in Geel (B) and Uitgeest (NL), in plastic conveyor belting, of the brands Chiorino, Volta, Nitta and Esbelt .

 

Not only traditional products such as conveyor belt cutting & joining, guiding strips, cleats (also fabric reinforced), corrigated sidewalls, closed edges, but also making vacuum holes, making longitudinal joinings, additionally coating conveyor belts and applying special profiles in the top layer.

We stock an enormous amount of rubber conveyor belts, in all types and widths, so that we can help you quickly.

 

The Narviflex Group is Michelin-Dunlop's “Approved Service Partner”. We also have rubber conveyor belts produced for our own brand "Rota Belting".

​

In our factory in Geel (B), we can extensively assemble the rubber conveyor belts, such as installing hot vulcanized cleats, making hot longitudinal joinings, making cross-rigid sidewall belting, making special hot vulcanized chevron belts and extensive waterjet work on rubber conveyor belts.

You can call on more than 175 technicians in the Benelux for:

 

• Installation of plastic conveyor belts

• Mounting Rubber Conveyor Belts

• Installation of metal mesh and modular belts

• Repairs, Maintenance and Mechanical Adjustment Works

• Assembly of Plastics Projects

• Installing your drive components

• Maintenance of your Drives

Since August 2022, makes Esfo Metal mesh belts, part of the Narviflex Group. Premium metal mesh belts are made in the factory in Enschede by a team with more than 30 years of experience.

 

In addition to the standard products, we think solution-oriented with the customer and many problem-solving metal mesh belts have already been developed, which are now used all over the world to heat products or bring them to frozen temperatures.

Narviflex stocks a mass of modules, rods, cleats, side plates and sprockets in the production unit in Drachten (NL). This allows us to create one at very short notice, if necessary modular belt, put it together for you.

 

The following piches are available:

• 8 mm

• 1/2″ (12.7 mm)

• 1″ (25.4 mm)

• 2″ (50.8 mm)

• Radius and Grip modules

In addition to the standard conveyor belts, we produce a lot more : special belts, which require special machines, techniques and craftsmanship:

• Timing belts (Open length, joined, joining also possible on site, laggings, cleats, etc.)

• Drive and Machine Belts

• Round and V-belts in Poly-Urethane (from the top brand Volta)

• PTFE Conveyor and Mesh Belts

• Endless woven belts and conveyor belts

• Volta Power

From our production facility, we can offer you top class drums, carrying rollers and trough sets. Our drums become almost always equipped with clamping bushess , so that the axles can be replaced separately.

​

There is an autoclave in our factory itself. This means that drums and rollers can be provided ex works with a hot vulcanized white or black rubber lagging, with or without a profile.

We stock a wide range of rubber & polyurethane articles and process them for you:

• Funnels

• Flat seals (Cut according to your CAD plan)

• Blackrock 60 sh A Trelleborg black abrasion resistant rubber. Yellowfine 45 sh A Trelleborg yellow wear-resistant and elastic rubber. RedFine Plus 35 sh A Trelleborg red/pink highly elastic wear-resistant rubber

• bandes en pvc et joints d'étanchéité

• Waterjet Cutting in Plastic and Rubber Materials

Our three Zünd CNC cutting machines run continuously for cutting strips in plastic and rubber (Narvistar PU, PVC, PE, Silicone), according to the customer's model or plan.

 

The machines have all available options, such as infeed and outfeed conveyors, infeed and outfeed robots, ultrasonic unit, milling heads, punching heads and Z-saw units.

The Narviflex Group has a wide range of components that make the operation and management of your conveyor belt installation more efficient:

• Scrapers: from the brands Martin Engineering, MLT, Flexco and Master Cleaner

• Guiding rollers: from the brands Martin Engineering, MLT and Flexco

• Belt lacing and repair materials: from the brands Flexco and MLT

• Drum motors and roller drives: from the brands Interroll and Van Der Graaf

Mineral Composite is part of the Narviflex Group and is a specialist for all applications in Polyester, Vinylester and Epoxy:

• Acid-resistant and Anti-Static floor and wall coverings

• Renovation of, among other things, storage tanks and water tanks

• Lining emergency receptacles

• Making materials and shapes in polyester, including superstructure vending carts, blades for windmills, hoods for cooling tunnels, etc.

• Shapes and coverings for the entertainment industry (amusement parks, TV, dance festivals, etc.)

Narviplastx is happy to make processed parts for you in plastic in its processing workshops in Geel (B) and Ghent (B). The advantage is that we have almost all plastics in stock, in all thicknesses, diameters and colors:

• Milling (large and small series – Haas milling machines with robots)

• Turn

• Waterjet cutting (also at an angle)

• Glue

• Folding, profiling, welding, polishing, thicknessing

• Assistance to your designers for creating the CAD Drawings

In our Narviplastx department, we stock a mass of plastics, both in sheet form, in rod form, or hollow rod.

 

These can be purchased as a whole, but cutting to size (even small quantities) is certainly possible.

 

We stock: ABS, GRP, PA6, PE, HDPE, UHMPE, PEEK, PETP, PF CC, POM, PP, PTFE, PVC, PUR, PC, PMMA.

We have to make innovative products ourselves, or come and assemble them at your place:

​

• PCK Collision protection

• Safety Gates

• GRP (Glass Fiber Reinforced Polyester) walkways, handrails and stairs

• Renovation panels for walls and ceilings

• Profiles and Machine Shielding

Rindus, with branches on the Narviflex sites in Geel (B) and Ghent (B), is the specialist in Components for Drives:

​

• Bearings and Bearing Blocks (SKF Authorized Distributor)

• Pneumatics (Festo Official Partner)

• Motors and Gearboxes (Distribution SEW, ABB and Simotop)

• Belts and Pulleys (Optibelt, Gates, Megadyne)

• Couplings (KTR and Rexnord)

• Linear technology (Ewellix – SKF Motion)

• Link straps & Conveyor Parts (System Plast, Rexnord, Modutech)

• Seals and Vibration Dampers

• Chains and Sprockets (Tsubaki)

The Rindus Service Center in Geel (B) specializes in overhaul and repairs of:

• Gearmotors

• Electric motors AC/DC

• Drum motors

• Pumping

• Pneumatic control cabinets

• Repairing and revising links

• Repairing and overhauling V- and toothed belt drives

• Repairing air cylinders

• Etc.